Igo-w4
Igo W4 underneath capExtra-Parts

Youde Igo-W4 (dual coil dripper)

$15.99

In stock

SKU: 160884. Category: .

Product Description

Youde-UD IGO-W4

The IGO-W4 is a dual coil stainless steel dripping system. It is an updated design to the IGO-W allowing for an easier grip to pull the top cap off. It has a 510 base, two positive posts, and one negative post between both of the positives making it for a relatively easy assembly. The IGO-W4 comes with enough material to create one coil for it. This dripper is great for those who like to build their own coils or for someone who is looking for bigger vapor production and more flavor. This item is not designed for beginners as there is a fair amount of mechanical ability needed to build a safe and proper coil. Youde has made a great and affordable dripper which performs just as well as some of the higher end drippers that can cost in some cases over $100. At $15.99 you can be doing the same thing as those higher end drippers and not be missing out on anything with the extra cost. Assembled, the IGO-W4 is made of stainless steel and weighs in at approximately one ounce, with an approximate length of 0.9 inches, and an approximate width of 0.6 inches. The top cap has two 0.8 mm. holes for airflow which helps to generate big vapor clouds. The top cap is also interchangeable between the original IGO-w4 and the IGO-L. This kit will come with two extra replacement O-Rings, one extra post screw, kanthol wiring, silica wicking material, and one extra rubber gamut for the negative post.

What’s in the box?

  • Stainless steel dripping system
  • Replacement screw
  • Replacement gamut
  • Replacement wick and wire

Specs

  • Height: 0.9 inches
  • Width: 0.6 inches
  • Weight: 0.6 inches
  • Air holes: 0.8 mm
  • Stainless Steel Build

Overview

The IGO-W4 from Youde-UD, a stainless steel dual coil dripping system. Get high production at a low cost. This item is for an advanced user. Please buy with caution as it is a non-returnable item. When building sub ohm coils it should also be noted that this will not work on a mod with variable voltage as they generally have a cutoff at 1.3 ohms. It is best when paired with a mechanical mod such as the Magneto.